disktipsforbricksmagnifier

 

 

Thank you for deciding on “clay” bricks.  You have made the right and wise decision.  You have selected a superior natural product with the most important advantages being:


CLASSIFICATION OF BRICKS

It’s so easy.  Please see hereunder for the classification of bricks.

BRICK ORDERING


BRICK DELIVERIES


BLENDING OF BRICKS

As is well known by  Architects and Builders alike, the artistic, and aesthetic qualities of brick wall panels are best achieved and enhanced by paying attention to blending of bricks, as is prescribed in many other countries.

In years gone by this was achieved by selecting bricks into a wheelbarrow at random along a heap of bricks, thus “mixing” the bricks.
With our “cube pack” package of 500 bricks, this is achieved easily and without any extra costs.  In addition the builder can in fact show considerable savings in handling.

To achieve maximum blending effect in your wall panels, you should work with 5 or 6 packs at the same time, taking from each pack in turn.

MINIMUM LOADS

Our minimum loads are 10 000 bricks.  You are welcome to order less bricks, but a surcharge will be applied for transport.

BREAKAGES

The norms in the brick industry for breakages is 5%.  Please do not hesitate to contact us should you need any assistance or clarification.

THE RIGHT CLAY BRICK FOR THE RIGHT JOB

IT’S SO EASY!

FBS    FACE BRICK STANDARD
Clay bricks that are selected or produced for their durability and uniformity of size and shape.

FBX    FACE BRICK EXTRA
Clay bricks that are selected or produced for their durability and high degree of uniformity of size, shape and colour.

FBA    FACE BRICK AESTHETIC
Clay bricks that are selected or produced for their durability and aesthetic effect, deriving from non-uniformity of size, shape or colour.

NFP    NON-FACING PLASTERED
Clay bricks suitable for general building work that is to be plastered.

NFX    NON-FACING EXTRA
Clay bricks suitable for use, plastered or unplastered, and general building work where durability rather than aesthetics are the key selection criteria:

...E     ENGINEERING UNITS

Masonry units produced for structural or load-bearing purposes in face or non-face work, where the manufacturer supplies clay bricks to an agreed compressive strength.  An engineering unit is designated by the addition of the letter E followed by a number equal to the nominal compressive strength in megapascals, e.g. NFXE 21.